ASTM F887-23

2577895

Standard Specifications for Personal Climbing Equipment

standard by ASTM International , 11/01/2023

This standard is not available for sale.

Track This

Full Description

Table of Contents Section Title Section/Paragraph  Scope 1  Referenced Documents 2  Terminology 3  Significance and Use 4 Pole and Tree Climbers    Classification 5  Ordering Information 6  Pole and Tree Climbers 7  Climber Gaffs 8  Climber Straps 9  Climber Pads 10  Climber Footplates 11 Body Belts, Positioning Devices and Wood Pole Fall Restriction Devices (WPFRD)    Classification 12  Ordering Information 13  Two Dee Body Belts, Auxiliary Positioning Belts, and Four Dee Body Belts 14  Two Dee Body Belts 14.1  Auxiliary Positioning Belts and Four Dee Body Belts 14.2  Positioning Devices 15  Wood Pole Fall Restriction Device (WPFRD) 16  Arborist Saddle  17 Harnesses    Classification 18  Ordering Information 18.2  Sizing 18.3  Marking 18.4 Energy Absorbing Lanyards    Classification 19  Ordering Information 20  Energy Absorbing Lanyards 21 Qualification Testing    After Exposure to an Electric Arc 22  Hardware Requirements 23  Test Equipment 24  Qualification Testing 25  Body Belts, Four Dee Body Belts, and Auxiliary Positioning Belts 25.1  Positioning Devices 25.2  WPFRD 25.3  Arborist Saddle 25.4  Harness 25.5  Energy Absorbers 25.6  Instructions 26  Guarantee and Rejection 27  Keywords 28
1.1 This standard covers the specifications and qualification testing of the following:
Climbers, Climber straps, Climber Pads, Climber Footplates, Body Belts, Work Positioning Devices with Locking Snaphooks/Carabiners, Wood Pole Fall Restriction Devices (WPFRD), Arborist Saddle, Harnesses, Energy Absorbing Lanyards.
These devices are used by workers in the climbing of poles, trees, towers, and other structures. Minimum performance criteria for harnesses and energy absorbing lanyards in arresting a fall after exposure to electric arcs are included for workers who may be exposed to thermal hazards of momentary electric arcs or flame.
1.2 Equipment may fall within one of the following categories:
1.2.1 Fall (Travel) Restraint-Prevents a user from reaching a fall hazard (allow 0 fall distance).
1.2.2 Work Positioning-Allows a 2 ft maximum free fall distance.
1.2.3 Fall Arrest-Allows a 6 ft maximum free fall distance with a maximum arrest force of 1800 lb.
Note 1: Under certain conditions and with the use of equipment designed for such conditions, a 12-ft free-fall distance with a maximum arrest force of 1800 lb is allowed.
1.2.4 Suspension-Allows 0 free-fall distance while supporting the user''s weight.
1.2.5 Fall Restriction-to prevent or limit free fall from a work position or while ascending/descending a wood pole.
1.3 Three types of climbers, (Types A, B, and C) and two types of climber straps, Types (A and B) are covered.
1.4 Two types of body belts, (Types A and B) are covered.
1.5 Eight types of work positioning devices: three positioning straps, (Types A, B, and C), three adjustable-positioning lanyards, (Types A, B and C) and two nonadjustable positioning lanyards, (Types A and B) are covered.
1.6 Two types of WPFRD, (Types A and AB) are covered.
1.7 Arborist saddle, (Type A) Work Positioning and Suspension are covered.
1.8 Two types of harnesses, (Types A and B) are covered.
1.9 Two types of energy absorbing lanyards, (Types A and B) are covered.
1.10 The values stated in United States customary units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard.
1.11 The following safety hazards caveat pertains only to the test method portions, 9.2, 10.3, 11.2, 14.1.4, 15.3, 15.4, 16.2, 17.2, 18.4, 21.2, 22, 23, and 25 of this standard: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use.
1.12 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
See more

Also Bought By Customers

 

Document History

  1. ASTM F887-23

    👀 currently
    viewing


    Standard Specifications for Personal Climbing Equipment

    • Most Recent

  2. ASTM F887-20


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  3. ASTM F887-18


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  4. ASTM F887-16


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  5. ASTM F887-13


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  6. ASTM F887-12e1


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  7. ASTM F887-12


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  8. ASTM F887-11


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  9. ASTM F887-10a


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  10. ASTM F887-10


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  11. ASTM F887-05e1


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  12. ASTM F887-05


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  13. ASTM F887-04


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

  14. ASTM F887-97


    Standard Specifications for Personal Climbing Equipment

    • Historical Version

Order Options

Unavailable

Product Details

Published:

11/01/2023

Number of Pages:

34