BS EN 10083-3:2006 Historical

BS EN 10083-3:2006, in addition to Part 1, specifies the technical delivery requirements for:

- semi-finished products, hot formed, e.g. blooms, billets, slabs (see NOTES 2 and 3 in EN 10083-1:2006, Clause 1),

- bars (see NOTE 2 in EN 10083-1:2006, Clause 1),

- rod,

- wide flats,

- hot-rolled strip and sheet/plate,

- forgings (see NOTE 2 in EN 10083-1:2006, Clause 1), manufactured from the direct hardening alloy steels for quenching and tempering and the alloy flame and induction hardening steels and supplied in one of the heat treatment conditions given for the different types of products in Table 1, lines 2 to 6, and in one of the surface conditions given in Table 2.

The steels are generally intended for the fabrication of quenched and tempered, flame or induction hardened machine parts.

The requirements for mechanical properties given in this document are restricted to the sizes given in Table 8.

NOTE BS EN 10083-3:2006 does not apply for bright steel products. For bright steel products EN 10277-1 and EN 10277-5 apply.

In special cases, variations in these technical delivery requirements or additions to them may be agreed at the time of enquiry and order (see Annex A).

Cross References:
EN 10002-1
EN 10020
EN 10027-1
EN 10027-2
EN 10045-1
EN 10083-1:2006
EN 10160
EN 10163-2
EN 10204
EN 10221
CR 10261
EN 10308
EN ISO 377
ISO 377:1997
EN ISO 642
ISO 642:1999
EN ISO 643
ISO 643:2003
EN ISO 3887
ISO 3887:2003
EN ISO 6506-1
ISO 6506-1:2005
EN ISO 6508-1:2005
ISO 6508-1:2005
EN ISO 14284
ISO 14284:1996
EN 10021