BS EN 14033-3:2017 ✓ Most Recent

BS EN 14033-3:2017 specifies the significant hazards, hazardous situations and events common to rail bound machines and arising due to the adaptation for their use on railways. These machines are intended for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer, see Clause 4.

This European Standard applies to railbound machines and other vehicles - referred to as machines - working exclusively on the railway (utilizing friction adhesion between the rail and rail wheels) but including machines that in working position are partly supported on the ballast or the formation and used for construction, maintenance and inspection of track, structures, infrastructure and fixed electric traction equipment. This European Standard applies to machines that are intended to operate signalling and control systems. Other similar machines are dealt with in other European Standards, see Annex G.

This European Standard specifies the common hazards, in normal circumstances, during running, assembly and installation, commissioning, use (including setting, programming, and process changeover), operation, cleaning, fault finding, maintenance and de-commissioning of the machines.

Additional safety measures can be required by exceptional circumstances, such as extreme ambient temperatures highly corrosive or contaminating environment; e.g. due to the presence of chemicals, and potentially explosive atmospheres.

Specific measures for exceptional circumstances are not dealt with in this European Standard. The specific measures for exceptional circumstances introduced by a railway infrastructure manager and requirements introduced by the manufacturer and/or machine operator as referred to in the scope are not dealt with in this European Standard. When such additional measures are necessary, they should be agreed between the manufacturer and the machine operator. The manufacturer will be responsible independently of this European Standard, for the provision of risk reduction measures for additional hazards created by any additional or alternative requirements.


Cross References:
EN ISO 14120 (ISO 14120:2015) AS
EN 620:2002
EN 474-1:2006+A4:2013
EN 894-3:2000
IEC 61310-2:2007
EN ISO 3411 (ISO 3411:2007) AS
EN ISO 14122-3 (ISO 14122-3:2016) AS
EN 61310-1 (IEC 61310-1:2007) AS
EN ISO 12001 (ISO 12001:1996) AS
ISO 13732-1:2006 Ed 1
ISO 5353:1995 (R05)
EN 50155:2007
ISO 13849-1:2015
EN 15746-1:2010
EN 1032:1996
ISO 13855:2010 Ed 2
ISO 13850:2015
ISO 7000:2012 DB ED4
EN 842:1996
EN ISO 4414 (ISO 4414:2010) AS
IEC 61310-3:2007
EN ISO 4871:2009 (ISO 4871:1996) AS
ISO 3795:1989
ISO 13849-2:2012 ED2
ISO 6682:1986
EN 60204-32 (IEC 60204-32:2008) AS
ISO 5006:2006 Ed 1
ISO 12508:1994 (R10)
EN ISO 7731:2008 (ISO 7731:2003) AS
EN ISO 13855 (ISO 13855:2010) AS
EN ISO 5353
EN 62262
EN 3
EN 61508
EN 280
EN 28662-1
ISO 10263
EN 2
EN 61310-2
EN 981:1996
EN 60825-1:2014/prA
EN ISO 13849-2 (ISO 13849-2:2012) AS
EN ISO 13857 (ISO 13857:2008) AS
EN 14033-2:2017
EN 16507:2014
EN 60529:1991
EN 61310-3 (IEC 61310-3:1999 Adopted)
EN 547-2:1996
ISO 3864-1:2011 CD-ROM Ed 2
EN ISO 6683:2008 (ISO 6683:2005) AS
EN 619:2002
EN 2867:2009
EN ISO 11201 (ISO 11201:2010) AS
ISO 3744:2010 Ed 3
EN ISO 3471 (ISO 3471:2008) AS
ISO 14122-2:2016
ISO/TR 9953:1996 (R10)
ISO 4414:2010 CD-ROM Ed 3
ISO 2867:2011 Ed 7
EN 547-1:1996
EN 614-1:2006
ISO 14122-3:2016
EN ISO 12100 (ISO 12100:2010) AS
EN ISO 14122-2 (ISO 14122-2:2016) AS
EN ISO 3744 (ISO 3744:2010) AS
EN 12999:2011
ISO 12001:1996
ISO 4413:2010 CD-ROM Ed 3
EN 15153-2:2013
EN ISO 13849-1 (ISO 13849-1:2015) AS
IEC 61310-1:2007
EN 61496-1 (IEC 61496-1:2012) AS
EN 894-2:1997
EN 547-3:1996
ISO 14120:2015
EN 16704-2-1:2016
ISO 12100:2010 Ed 1
ISO/TR 11688-1:1995
EN ISO 13732-1:2008 (ISO 13732-1:2006)AS
I


All current amendments available at time of purchase are included with the purchase of this document. See more