BS EN ISO 14224:2016 ✓ Most Recent

BS EN ISO 14224:2016 provides a comprehensive basis for the collection of reliability and maintenance (RM) data in a standard format for equipment in all facilities and operations within the petroleum, natural gas and petrochemical industries during the operational life cycle of equipment. It describes data collection principles and associated terms and definitions that constitute a "reliability language" that can be useful for communicating operational experience. The failure modes defined in the normative part of this International Standard can be used as a "reliability thesaurus" for various quantitative as well as qualitative applications. This International Standard also describes data quality control and assurance practices to provide guidance for the user.

Standardization of data collection practices facilitates the exchange of information between parties, e.g. plants, owners, manufacturers and contractors. This International Standard establishes requirements that any in-house or commercially available RM data system is required to meet when designed for RM data exchange. Examples, guidelines and principles for the exchange and merging of such RM data are addressed. This International Standard also provides a framework and guidelines for establishing performance objectives and requirements for equipment reliability and availability performance. Annex A contains a summary of equipment that is covered by this International Standard.

This International Standard defines a minimum amount of data that is required to be collected, and it focuses on two main issues:

• data requirements for the categories of data to be collected for use in various analysis methodologies;
• standardized data format to facilitate the exchange of reliability and maintenance data between plants, owners, manufacturers and contractors.

The following main categories of data are to be collected:

• equipment data, e.g. equipment taxonomy, equipment attributes;
• failure data, e.g. failure cause, failure consequence;
• maintenance data, e.g. maintenance action, resources used, maintenance consequence, down time.

NOTE Clause 9 gives further details on data content and data format.

The main areas where such data are used are the following:

• reliability, e.g. failure events and failure mechanisms;
• availability/efficiency, e.g. equipment availability, system availability, plant production availability;
• maintenance, e.g. corrective and preventive maintenance, maintenance plan, maintenance supportability;
• safety and environment, e.g. equipment failures with adverse consequences for safety and/or environment.

This International Standard does not apply to the following:

• data on (direct) cost issues;
• data from laboratory testing and manufacturing (e.g. accelerated lifetime testing), see also 5.2;
• complete equipment data sheets (only data seen relevant for assessing the reliability performance are included);
• additional on-service data that an operator, on an individual basis, can consider useful for operation and maintenance;
• methods for analysing and applying RM data (however, principles for how to calculate some basic reliability and maintenance parameters are included in the annexes).

Cross References:
ISO 20815:2008
ISO 2314:2009
ISO 3977
ISO 5208:2015
ISO 8528-1
ISO 8528-2
ISO 8528-3
ISO 8528-4
ISO 8528-5
ISO 8528-6
ISO 8528-7
ISO 8528-8
ISO 8528-9
ISO 8528-10
ISO 8528-12
ISO 10417:2004
ISO 10418:1/Cor 1:2008
ISO 10423:2009
ISO 10432:2004
ISO 10437:2003
ISO 10439-1:2015
ISO 10439-2:2015
ISO 10439-3:2015
ISO 10439-4:2015
ISO 10442:2002
ISO 11960:2014
ISO 11961:2008
ISO 12211:2012
ISO 12212:2012
ISO/TR 12489:2013
ISO/PAS 12835:2013
ISO 13053:2011
ISO 13354:2014
ISO 13623:2009
ISO 13624-1:2009
ISO 13628-1:2005
ISO 13628-4:2010
ISO 13628-5:2009
ISO 13628-7:2005
ISO 13628-15:2011
ISO 13631:2002
ISO 13679:2002
ISO 13702:2015
ISO 13703:2000
ISO 13706:2011
ISO 13707:2000
ISO 13709:2009
ISO 13710:2004
ISO 14001
ISO 14310:2008
ISO 14313:2007
ISO 14723:2009
ISO 14998:2013
ISO 15136-1:2009
ISO 15138:2007
ISO 15544:2000
ISO 15547-1:2005
ISO 15547-2:2005
ISO 15551-1:2015
ISO 15649:2001
ISO 15663-1:2000
ISO 15663-2:2001
ISO 15663-3:2001
ISO 15926
ISO 16070:2005
ISO 16530-1


All current amendments available at time of purchase are included with the purchase of this document. See more