BS EN ISO 16701:2015 Historical

BS EN ISO 16701:2015 specifies the test method, the reagents, and the procedure to be used in an accelerated atmospheric corrosion test constituting a 6 h exposure to a slightly acidified solution of 1 % NaCl twice weekly, followed by a condition of controlled humidity cycling between 95 % RH and 50 % RH at a constant temperature of 35 °C.

This International Standard does not specify the dimensions of the tests specimens, the exposure period to be used for a particular product, or the interpretation of the results. Such details are provided in the appropriate product specifications.

The accelerated laboratory corrosion test applies to

• metals and their alloys,
• metallic coatings (anodic or cathodic),
• chemical conversion coatings, and
• organic coatings on metallic materials.

NOTE 1 If testing low-alloy stainless steels, especially austenitic grades, according to this International Standard, there is a risk of receiving exaggerated pitting, not representative for most service environments.

NOTE 2 This International Standard is not suitable for testing of wax and oil based rust protection agents, due to the constantly elevated temperature condition of the test.


Cross References:
ISO 4628-1
ISO 4628-2
ISO 4628-4
ISO 4628-5
ISO 8407
ISO 10289
ISO 3574
ISO 9223:2012
ISO 9227


All current amendments available at time of purchase are included with the purchase of this document. See more