BS EN ISO 1825:2011 Historical

BS EN ISO 1825:2011 specifies the dimensions and construction of, and requirements for, four types of hose and hose assembly for use in all operations associated with the ground fuelling and defuelling of aircraft.

All four types are designed for

a) use with petroleum fuels having an aromatic-hydrocarbon content not exceeding 30 % by volume;

b) operation within the temperature range of -30 C to +65 C and such that they will be undamaged by climatic conditions of -40 C to +70 C when stored in static conditions;

c) operation at up to 2,0 MPa (20 bar) maximum working pressure, including surges of pressure which the hose can be subjected to in service.

NOTE 1 Type C hoses are intended for general pressure applications on all vehicles used for plane fuelling. They can also be used for vehicle/rail car loading and discharge where excessive vacuum does not occur.

NOTE 2 Type F hoses can be used for plane delivery applications on vehicles that are also used for defuelling at high flow rates where type C hoses are not suitable.

NOTE 3 Type E and F hoses can also be used for vehicle/rail car loading and discharge, for trailer to fueller transfer and for elevation platform supply (riser) to provide greater kink resistance.

Cross References:
ISO 37
ISO 188
ISO 1382
ISO 1402
ISO 1817:2005
ISO 2230
ISO 4649:2002
ISO 4671
ISO 4672:1997
ISO 6246
ISO 7326
ISO 7989-1
ISO 7989-2
ISO 8031
ISO 8033
ISO 8330
EN 1361:2004
API 1529:2005


All current amendments available at time of purchase are included with the purchase of this document. See more