BS ISO 10639:2017 Historical

BS ISO 10639:2017 specifies the properties of piping system components made from glass-reinforced thermosetting plastics (GRP) based on unsaturated polyester resin (UP). It is suited for all types of water supply with or without pressure, including, but not limited to, raw water, irrigation, cooling water, potable water, salt water, sea water, penstocks in power plants, processing plants and other water-based applications. This document is applicable to GRP UP piping systems, with flexible or rigid joints with or without end thrust load-bearing capability, primarily intended for use in direct buried installations.

The requirements for the hydrostatic pressure design of pipes referring to this document meet the requirements of ISO/TS 20656-1 and the general principle for the reliability of structures detailed in ISO 2394 and in EN 1990. These International Standards provide procedures for the harmonization of design practices and address the probability of failure, as well as possible consequences of failures. The design practices are based on a partial safety factor concept, as well as on risk management engineering.

This document is applicable to pipes, fittings and their joints of nominal sizes from DN 50 to DN 4000 which are intended to be used for the conveyance of water at temperatures up to 50 °C, with or without pressure. In a pipework system, pipes and fittings of different nominal pressure and stiffness ratings may be used together. Clause 4 specifies the general aspects of GRP UP piping systems intended to be used in the field of water supply with or without pressure.


Cross References:
ISO 4200:1991
ISO/TS 20656-1:2017
ISO 2394:2015
ISO 18851:2015 ED1
ISO 10466:1997 (R09)
ISO 10471:2003
ISO 7432:2002 Ed 1
ISO 8639:2016
ISO 75-2:2013 ED3
ISO 11922-1:1997
ISO 3126:2005 (R10) Ed 2
ISO 8483:2003 (R10) Ed 1
ISO 527-5:2009 Ed 2
ISO 527-4:1997
ISO 10468:2003
ISO 7685:1998
ISO 8513:2016
CEN/TS 14632:2012
ISO 161-1:1996
ISO 7509:2015
ISO 8533:2003 (R10) Ed 1
ISO 4633:2015
ISO 10928:2016
ISO 2531:2009 Ed 6
ISO 8521:2009 Ed 2
ISO 7511:1999
JIS A5350:1991 (E) (R01)
ISO 25780:2011
EN 14364:2013
AWWA C950:2007
ISO 10467:2004 Ed 1
ISO 2078:1994
EN 1990:2002
AWWA M45:2005
EN 1796:2013
ISO/IEC 17025:2005
EN 681-2:2000
EN 681-1:1996


All current amendments available at time of purchase are included with the purchase of this document. See more