CSA W117.2-06 (R2011) Historical

Update #1 was published as notification that this is now a National Standard of Canada.

This PDF includes updates #1 & 2.

Preface

This is the fifth edition of CSA W117.2, Safety in welding, cutting, and allied processes. It supersedes the previous editions published in 2001, 1994, 1987, and 1974. Its subject is the health and safety of welders and welding operators. The safe design of welding equipment is covered in other Standards that are referenced in this document.

1 Scope

1.1 Objective

1.1.1
This Standard provides minimum requirements and recommendations to protect persons who work in an environment affected by welding, cutting, and allied processes from illness and injury, and to prevent damage to property arising from the installation, operation, and maintenance of equipment used in these processes.

1.1.2
This Standard specifies the elements of a welding health and safety program (see Clause 4) that are necessary to implement the requirements and recommendations described in Clause 1.1.1.

1.2 Applicability

1.2.1
This Standard applies to all personnel working in an environment affected by welding, cutting, and allied processes.

1.2.2
The requirements of this Standard apply to the processes illustrated in the Master chart of welding and allied processes (see Figure A.1).

1.2.3
Where a conflict arises between a requirement in this Standard and the legislative requirements of a provincial or federal jurisdiction, the legislative requirements prevail.

1.3 Exclusions

This Standard does not apply to the design or manufacture of welding or safety equipment.

1.4 Terminology

In CSA Standards, "shall" is used to express a requirement, i.e., a provision that the user is obliged to satisfy in order to comply with the standard; "should" is used to express a recommendation or that which is advised but not required; "may" is used to express an option or that which is permissible within the limits of the standard; and "can" is used to express possibility or capability. Notes accompanying clauses do not include requirements or alternative requirements; the purpose of a note accompanying a clause is to separate from the text explanatory or informative material. Notes to tables and figures are considered part of the table or figure and may be written as requirements. Annexes are designated normative (mandatory) or informative (non-mandatory) to define their application. See more