BS EN 14309:2015 ✓ Most Recent

BS EN 14309:2015 specifies the requirements for factory made products of expanded polystyrene which are used for the thermal insulation of building equipment and industrial installations with an operating temperature range of approximately - 180 °C to + 80 °C. Modified expanded polystyrene polymers with a higher temperature resistance are also covered by this standard.

Below an operating temperature of - 50 °C, special tests regarding the suitability of the product in the intended application are advised (e.g. liquefaction of oxygen). Manufacturers' advice should be heeded in all cases.

The products are manufactured in the form of faced or unfaced boards, rolls, lags, pipe sections or other prefabricated ware.

This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.

Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.

This standard does not specify the required level or class of a given property that should be achieved by a product to demonstrate fitness for purpose in a particular application. The classes and levels required for a given application can be found in regulations and invitations to tender.

Products with a declared thermal conductivity greater than 0,060 W/(m·K) at 10 °C are not covered by this standard.

This standard does not cover products for in situ insulation (for loose fill or poured insulation) or products for the insulation of the building structure.


Cross References:
EN 822
EN 823
EN 824
EN 825
EN 826
EN 1602
EN 1603
EN 1604
EN 1606
EN 1607
EN 12085
EN 12086
EN 12087
EN 12088
EN 12089
EN 12091
EN 12431
EN 12667
EN 12939
EN 13163
EN 13172:2012
EN 13467
EN 13468
EN 13469
EN 13470
EN 13501-1:2007+A1:2009
EN 13823
EN 14706
EN 14707
EN 14933
EN 15715:2009
EN 29052-1
EN ISO 1182
ISO 1182:2010
EN ISO 1716
ISO 1716:2010
EN ISO 8497
ISO 8497:1994
EN ISO 9229:2007
ISO 9229:2007
EN ISO 11925-2
ISO 11925-2:2010
EN ISO 13787
ISO 13787:2003
305/2011/EU
EN 1991-1-1
EN 12090
EN 13238
EN 13471
EN 13793
EN ISO 10456
ISO 10456:2007
ISO 65
ISO 9705


All current amendments available at time of purchase are included with the purchase of this document. See more